iStick TC40W: Overview, Tutorial and Instructions

The latest re-iteration of the iStick adds temperature management to the iStick’s spectacular list of skills, permitting you even bigger management over the your vaping expertise and just about eliminating the danger of a dry hit.

I’ve struggled to seek out a lot of I don’t like with this device.

For the compact size it’s very powerful, it comes with advanced vaping options and is sleek and enticing – some folks have mentioned a awfully slight rattle once you shake it exhausting, however I realize it barely noticeable.

Despite the built-in 2600mah battery, I even have found that the battery life isn't pretty much as good in temperature management as in variable power once is mistreatment kanthal wires, though in theory it ought to be higher.

Advanced users might like a tool with the next power, however 40w is quite enough for folks that square measure employing a variable voltage/wattage device and square measure yearning for succeeding device to maneuver up to.

IMPORTANT – to create use of the temperature management options of the istick TC40W, you wish to use a nickel temperature sensing coil. Temperature sensing coils square measure obtainable for here, and square measure compatible with the draw a bead on imaginary place, the Fury Tank from AnyVape and therefore the draw a bead on Triton.
What we tend to like:

    advanced however simple to use temperature management (TC)
    switch between temperature management or variable power (VW)
 simple to use sub-ohm capability
    the sleek, compact, and enticing style the istick is legendary for
    improved raised, spherical fireplace button
 reasonable introduction to temperature controlled vaping

What we tend to don’t like:

 terribly slight rattle once you shake the device
 troublesome to visualize show in bright daylight
 might do with a lot of space for pushing buttons
    battery life once employed in temperature management might be higher

Contents

    Overview
    Why Use Temperature Control?
    Charging and Battery Safety
 putting in the Clearomiser
 the way to switch between TC and VW mode
 the way to use TC mode
 the way to lock the resistance of the coil
 does one got to lock the coil?
 the way to use concealing mode
 the way to lock/unlock variable power mode
 the way to flip the screen
    Screen Displays
    Troubleshooting

Overview

    Thread: 510
    Variable Wattage: one – 40w
    Temperature range: 100－315℃/200－600℉

Protections

    Undervolt Protection
    Resistance Detection
    Overheat Protection
 tangency Protection

Resistance

    Temperature Controlled range: zero.05-1ohm
    Variable power range: zero.15-3.5ohm

Power

    Capacity: 2600mAh
    Rated output wattage: 1-40W

For full specs and options click here.
Why Use Temperature management Vaping?

As you employ your electronic fag, the temperature of your sprayer is consistently dynamical. Temperature controlled mods will maintain a standardized temperature by sleuthing the resistance modification of the sprayer throughout avocation exotic smoke.

For a full summary of temperature controlled vaping see Temperature Controlled Vaping: All you wish to grasp.

Do note that NI200 nickel coils square measure used for TC mode within the iStick 40w, and it's vital that you simply modification the clearomiser once you switch from VW mode to TC or the other way around.

Advantages:

    Avoids dry hits by setting the temperature below the burning purpose of cotton (approx 420F).
 permits a a lot of consistent flavour because the coil is maintained at a relentless temperature, as opposition variable power vaping once the coil is consistently dynamical in temperature.
 in theory permits for a extended battery life and reduced e-liquid once employed in tc mode, as illustrated by Eleaf below:

iStick-TC40W_1 iStick-TC40W_02 iStick-TC40W_03 iStick-TC40W_04

However, in observe I realize that the TC mode uses a lot of battery life than VW mode, maybe as a result of the ‘brain’ of the istick is functioning more durable. There is, though, a particular saving on e-liquid consumption!

You will got to pay slightly of your time to seek out that sweet spot once mistreatment temperature controlled (but it’s well price doing so).
Who is it for?

While not for the beginner, this box mod provides a decent introduction to temperature controlled vaping.

It’s conjointly ideal if you're already mistreatment variable power devices, and would love to do temperature controlled vaping – as a result of if TC mode isn't for you, you'll fall back to VW mode.
Charging

Charging the iStick TC 40w.

As with all box mods, provides a smart initial charge before 1st use. The Eleaf is charged with a micro-usb charger (charger equipped however you may want a plug adapter if charging from a wall plug). it'll take roughly three.5 hours to totally charge the iStick employing a 1A wall adapter.

When charging the battery indicator can flash – once full charged this may stop. once the battery level goes below 100 percent the battery indicator can flash once more. (Note that the unabridged dictionary screen can shut off once charging.)

Battery safety: As forever, solely use with a compatible charger. See our battery safety infographic for full safety tips.
Setting up the Clearomiser

You will got to use a clearomiser with a temperature controlled coil. thus if mistreatment the AnyVape Fury Tank, as an example, you'd got to modification your usual coil to a TC coil (available here).

As usual, make sure you prime your new coil 1st by dripping some e-liquid onto the coil and conjointly permitting it slow for the e-liquid to soak from the clearomiser into the coil. you'll see pictures and directions for priming the AnyVape tank here.

When your 1st use your iStick forty, you will get the subsequent message:
New Coil Up Same Down

If it's a brand new coil within the clearomiser, press up. If it's AN existing coil, press down. If you lock the coil, you won’t get this message, however certify you unlock the coil before changing/replacing it. (See below for a lot of info on protection or unlocking the coil.)
How does one Switch Between Temperature management and Variable Wattage?

Hold the centre button between the 2 arrows to change between temperature management and variable power.

Bear in mind that you simply can want totally different coils for the various mods. thus whereas you'll use a daily coil for variable power vaping, you may want a TC coil for TC vaping. The draw a bead on TC coils square measure clearly marked with a red o-ring.

The device won't operate properly in TC mode with a kanthal coil, and functions sporadically in VW mode with a TC coil. If it doesn't operate as a result of the incorrect coil is getting used you may get the message:
Atomiser Low

Using a TC coil in VW mode (or vice versa) also can injury the coil, thus it’s price checking to visualize if it's within the right mode.
How does one Use The iStick in Temperature management Mode?

TC mode.

Use the arrows to extend or decrease the temperature. The temperature can go up or down by ten degrees Fahrenheit when you press the button – hold the button down and therefore the accelerator can kick in.

(In distinction to another devices, you'll solely modify the temperature in temperature controlled mode, not the power, with the device mechanically adjusting the power to supply the temperature needed.)

Once you go past 600 degrees Fahrenheit, the device can modification to Anders Celsius, and can increase to a most of 315 degrees Anders Celsius in five degree increments.

Note that if you're employing a coil that is quite one ohm, the device can mechanically change of temperature management mode as a result of the temperature management vary is proscribed to a most resistance of one ohm. additionally, if the temperature gets too high, temperature protection can kick in and discontinue the device.

If you employ the iSitck forty in unbarred mode, then take away and replace a similar clearomiser, you may once more get the message:

New Coil Up, Same Down

This time, of course, press the down button so iStick is aware of you're mistreatment a similar sprayer (at a similar resistance).
How does one Use The Variable power Function?

Simply press the up and down buttons to regulate the power in zero.1 increments. to vary the voltage quicker merely hold the button down, and therefore the accelerator can kick in to hurry up the voltage modification.
Additional Functions
How does one Lock the Resistance of the Coil?

The resistance of the coil varies through the day. By protection the coil you lock the baseline resistance.

If you attach a TC coil that is heat from recent use, the resistance are going to be more than usual. If it's cold, the resistance are going to be not up to usual. thus TC coil resistance should be measured at temperature before protection the coil.

To lock the resistance of the coil, press the hearth button and therefore the up button at a similar time. If you take away the clearomiser and can replace it you may get a brand new resistance reading that takes under consideration the temperature of your coil – merely place the hearth button once to urge the fastened resistance back once more.

Important: once dynamical coils, make sure you unlock the resistance (press fireplace button and unlock again) so as to urge a brand new reading on the new coil. I’ve conjointly detected from one user WHO didn’t unlock the coil before dynamical it then found his iStick in permanent lock mode.
Do you got to lock the coil?

As we’ve seen, TC compatible devices mechanically modification the voltage place through to keep up a relentless resistance. thus why lock the coil?

In fact, you’re not really protection the coil, you're protection the baseline resistance. This helps the device calculate the modification in resistance from the baseline and conjointly suggests that you are doing not have to be compelled to choose new or existing coil anytime you re-attach your tank to your iStick. (CHECK)
How does one Use concealing Mode?

The iStick forty watt conjointly comes with a concealing mode. sadly, this won’t render you invisible or perhaps invisible , however it will switch unabridged dictionary show off – unbelievably helpful if you're concerned in evening time combat operations 😉

To switch between traditional and concealing mode merely hold down the hearth button and therefore the down button at a similar time.

See the way to concealing Vape sort of a Pro! if you actually wish to concealing vape!
How does one Lock/Unlock Variable power Settings?

Hold the 2 arrow buttons along at the same time to lock or unlock your power settings. thus if your most popular setting is thirty watts, you'll lock your device at this power.
How does one Flip The Screen?

Like the iStick thirty watt, this device comes with a flip screen feature designed to make sure it's appropriate for each right-handed and left-handed vapers. To flip the screen 1st flip the device off then hold the up and down buttons at the same time.
Screen Displays

The Eleaf iStick screen show.
Temperature management Mode

Temperature (F or C): The temperature that the coil are going to be heated to.
Resistance (Ω): The resistance of the coil required, displayed in ohms.
Voltage (V): The voltage needed to supply the power (see voltage, watts ANd ohms for an explanation).
Coil (Ni): The coil getting used within the clearomiser.
Variable Voltage

Resistance (Ω): The resistance of the coil required, displayed in ohms.
Voltage (V): The voltage needed to supply the power (see voltage, watts ANd ohms for an explanation).
Wattage (W: The power the device is about to.
Screen Messages

Over ten Seconds: Displayed once the device cuts out once it's been pink-slipped incessantly for ten seconds.
Battery Indicator: can flash once reaches 100 percent or less.
New Coil Up, Same Down: choose up for brand spanking new coil, down for existing coil (see higher than for a lot of detail).
Atomiser Low: sprayer Issue (see troubleshooting below).
Temp Protection: workererature protection has kicked in to prevent the sprayer from heating to higher than the set level.
Compatibility in temperature management mode

The iStick forty watt is compatible with the subsequent clearomizers from ECigaretteDirect:

Atlantis Sub Ohm Tank (when used with temperature controlled coils)
The Fury Tank
Triton Tank
The Triton mini
The Kanger SubOx mini

It will conjointly work with the other 510 rib TC-compatible tank/atomiser with nickel coils. (I haven’t tried it with metallic element coils nonetheless – if you have got, let American state shrewdness you bought on with it within the comments!)
Troubleshooting

Device Cuts Out

It is potential for the battery to chop out due to the heating protection operate. during this case, it's best to go away the device till the battery to chop out.

Atomizer Low

This can be  caused by employing a temperature controlled sprayer in power mode (or vice versa). this could injury the sprayer. To fix, replace with a daily sprayer before mistreatment in power mode, and switch back to a TC sprayer to use in TC mode.

It is potential to urge AN sprayer low message even once mistreatment the right sprayer

Try the subsequent fixes to resolve the difficulty.

    Twist the sprayer to make sure there's a firm however not exhausting association between the sprayer between the battery.
 take away the clearomiser and clean the connections. (If tissue doesn’t work, strive alcohol. (On the connections, not drinking. though each along ought to work too.))
 take away and replace the sprayer. this could permit you to spot if there's a difficulty with the battery or the clearomiser.